Clamps
GI Mid Clamp
Complete galvanized mid-clamp kit — clamp, spring nut and bolt in one pack, ready to install straight from the carton.
SLX-11
Get a quote
Clamps · SLX-10
Aluminium Mid Clamp
Also called: Alu Mid Clamp, aluminium module clamp, aluminum mid clamp
An aluminium mid clamp locks two adjacent solar panels onto the mounting rail or strut with a single bolt, and it doesn't rust. Solenix Solutions supplies anodised 6063 aluminium mid clamps for 30 and 35 mm panel frames to installers across India from Jalandhar, Punjab.
Supplied from Jalandhar, Punjab · Pan-India dispatch · Same-day quotes
Specifications
| Material & grade | Aluminium 6063 |
|---|---|
| Thickness / section | 3 mm |
| Coating | Anodised |
| Sizes / variants | 30 and 35 mm |
| Compatible with | 41×41 strut |
| Pack size | 96 sets/carton |
| MOQ | 192 sets |
| HSN code | 76109090 |
| Lead time | Same-day dispatch |
Why choose an aluminium mid clamp
Aluminium is light, doesn't rust and matches the aluminium frames of most solar panels. That makes it a good fit for aluminium rail systems, for coastal and humid sites, and for jobs where a lighter load on the roof matters.
This clamp is 3 mm thick, in 6063, the aluminium alloy most widely used for extruded profiles. It is anodised, which thickens the aluminium's natural oxide layer to protect the surface and keep the finish even. It comes in sizes for 30 and 35 mm frames and is made for 41×41 strut.
Installation notes
Fit one clamp on each rail or strut at every joint between two panels, inside the clamping zones given in the panel manual, and keep the gap between panels even. Aluminium is softer than steel, so tighten with a torque wrench or a driver on a low setting rather than at full power, which can deform the clamp.
Ordering from Solenix
Send the number of panels, the frame height and your delivery city on WhatsApp for a same-day rate; the pack size and minimum order are in the table above. You can add GI end clamp kits, spring nuts or our aluminium monorail to the same order, and it ships from Jalandhar with a tax invoice.
Frequently asked questions
Aluminium or GI mid clamp: which should I use?
GI is the economical choice for most inland sites. Aluminium is lighter and doesn't rust, so it suits aluminium rail systems and coastal or humid locations. For a steel structure on a harsh site, our HDG mid clamp is the other option.
Which panel frames does it fit?
Frames of 30 mm and 35 mm, on 41×41 strut. Take the frame height from the panel datasheet and order the matching size.
What does 6063 aluminium mean?
6063 is an aluminium alloy grade with small amounts of magnesium and silicon. It is the grade most used for extruded profiles such as rails and clamps, because it extrudes cleanly and resists corrosion well outdoors.
Related products
Clamps
HDG Mid Clamp
Hot-dip galvanized mid clamp with a thick zinc coat for maximum rust protection on coastal and high-exposure sites.
SLX-02
Get a quote
Rails & Structures
Alu Monorail
Anodised aluminium monorail in 300 mm pieces, 70 or 100 mm high — light to carry up a roof, rust-free, with a channel that takes standard clamp hardware.
SLX-20
Get a quote
Need a wholesale quote?
Send your product list and quantities on WhatsApp. We reply with rates the same day.